Calibrate: Vehicle Speed

This function is used to adjust the vehicle speed detected by the Echo sensor if required.

  1. Click the Calibrate tab.
  2. Click Speed calibration. This is a picture of the software.
  3. Select the check box to the left of each zone for which speeds are to be checked.
  4. Click Start.
  5. If the value in the Measured speed column is not correct, enter the difference in the Adjustment column. All detected speeds for the zone will be adjusted by the amount specified after you click Save.

    The value must be expressed as a percentage between +/- 10 and must be a whole number (e.g., 4 is OK but 4.5 is not).

  6. To save the values, click Save.