Settings: Maintenance

This section is used to backup/restore the current configuration, download a diagnostics file or to restart the sensor.

Reboot Device

This function is used to send a reboot command that will cause the sensor to restart.

Reset Region

This function is for manufacturing use only.

Download Diagnostics

This function creates a file that can be sent to ISS for diagnostic purposes if the sensor is experiencing problems. The file is saved to the default folder for your browser (usually the Downloads folder) on the computer and includes the following information:

• Interval and per-vehicle databases
• Operation logs
• Device configuration settings

• Depending on the amount of data in the databases this file can be extremely large, 100MB or more.

Backup/Restore Configuration

These functions are used to backup the current device configuration to a file in the Downloads folder of the computer or to restore a previously saved backup file.

The information that is included in the backup file is as follows.

• Setup File Version
• Sensor ID
• Sensor Model
• Firmware Version
• Timestamp when saved
• User Descriptions
• Location
  • Location Source
  • Latitude
  • Longitude
• Data Aggregation Config
  • Interval
  • Classification lengths
• Data Collection Config
  • Drop Inserts When Full (true/false)
• Legacy Protocol Settings
  • Protocol (No Protocol/SX300/Wavetronix)
  • Sx300: ID (1); Port; Push Statistics (true/false); Gap or Headway; Include Speed85 (true/false)
  • Wavetronix: Push Statistics (true/false); Include Direction (true/false); Source Subnet ID; Source ID; Destination Subnet ID; Destination ID; Port; Sensor Orientation; Sensor Location; Sensor Description
• Detection Config
  • Device ID (0)
  • Last Modified Date
  • Software Version
  • Config Version
  • Actions
• Sensors
  • Sensor Type (Radar)
  • Annotations
• Zones
  • Zone Type (vertical line zone)
  • ID
  • Name
  • Start
  • End
  • Traffic Direction
  • Lane Index
  • Speed Calibration (offset, multiplier)
  • Length Calibration (offset, multiplier)
  • Rules
• Radar Environment Config
  • Range Bin Energy Thresholds
• Zone Finder Settings
  • Count Threshold
• Zone Finder Vehicles
  • Main Bin
  • Length
  • Time Tick
  • Speed
  • Speed Confidence
  • Dwell Time